OxBlue Time-Lapse Cameras | Cobalt Series Construction Camera

INSTALL IN THREE SIMPLE STEPS

You have everything you need to activate and install your camera from the moment you open your box. No internet connection needed or complicated assembly; it’s all spelled out step by step inside the box.

POWER

Connect the camera to the power source and verify that the blue light is on.

ACTIVATION

After 20 minutes, call OxBlue support at (888) 849-2583 to finalize activation.

MOUNTING

Attach your camera with a few screws to its intended base on the job site.

Set up your OxBlue system

Camera Installation

Video Camera Installation

Solar Installation

Need someone to handle the installation? Let us know. We work with a national network of third-party installers.

The 5 P's to Pick the Best Spot for Your Camera

Our placement recommendations are based on over 20,000 projects worth of experience. Use our suggestions to simplify the decision process and ensure you get the most out of your project.

Positioning: Face the camera as close as possible to due North.
Placement: Placing the camera outside the construction area captures more of the job site and allows for seamless time-lapse videos.
Perspective: Mount the camera higher than the planned build to capture all stories or levels.
Phasing: Take project phases or tilt-up construction into account to ensure the camera’s view isn’t obstructed as the project progresses.
Power: If you’re not using an OxBlue solar power station, pick a location where power can be conveniently run to the camera.

More info

Application Form

Thanks for submitting your application. We will contact you soon.